The Drill Till is easy to assemble with our quick-attach bracket and included wrench.  Each of the 3 heads mounts the same. 

  1. First attach the two shafts and secure the bolts. 
  2. Next, insert the stabilizer bar into the desired head and secure it with the mounting bracket. 
  3. Finally, tighten the nuts and you are ready for action.

For tilling and light weeding, first insert the stabilizer point into the ground.   Then pull the trigger and keep your finger pressed as you steadily pulse the Tilling Head into and out of the ground, maintaining a depth of about 2-3 inches at all times. 

INSERT VIDEO CLIP HERE

For digging holes, again insert the stabilizer point into the ground.  Pull the trigger and plunge the Hole Digger head to the desired depth of your plant or bulb.

INSERT VIDEO CLIP HERE

Weeding with the Drill Till is a blast.  Line up the point of the stabilizer directly with the stem of the weed.  Pull the trigger and plunge the Weed Out head into the ground until the weed is uprooted. Take that you dirty dandelion!

INSERT VIDEO CLIP HERE